Black · stereo pair · IK Multimedia part IP-ILOUD-MM-IN
The iLoud Micro Monitor is a very small bi-amplified stereo pair that IK describes as master/slave active monitors, linked by an included 4-pin cable. It combines RCA, 3.5 mm and Bluetooth sources with an external power supply, which suits a laptop or compact desk setup more than a studio interface with balanced outputs.
A 56-bit DSP acts as a time-aligned digital crossover and controls dynamic range, and the 3-inch woofer with its front-firing bass-reflex port is rated down to 55 Hz (−3 dB).
IK's own pages disagree on the crossover frequency (3 kHz in the specifications, about 3.5 kHz on the product page), and they do not say which regional mains plug is supplied with the external power supply.
19 specifications in 7 groups. Values are manufacturer specifications unless a row says “Measured result” or “Calculated from cited specifications”.
System & drivers
4 items
Channel configuration
Stereo pair of two speakers sold as one package; IK describes them as master/slave active studio monitors linked by the included 4-pin speaker connection cable (2 m)
Sold as a pair under one SKU. IK lists separate left (0.92 kg) and right (0.80 kg) speaker weights; the capturable official pages do not say which speaker holds the amplifiers and inputs.
107 dB at 50 cm (both speakers); 92.0 dB continuous and 102.5 dB peak at 1 m (one speaker)
Two different bases: 107 dB with both speakers playing, sine wave averaged 100 Hz–10 kHz at 50 cm; 92.0 dB continuous / 102.5 dB peak in free field, one speaker, 1 m, ANSI-2034 weighted pink noise.
IK's specifications page lists a 3 kHz crossover frequency, while the product page says the drivers are digitally crossed over at about 3.5 kHz. Left unresolved.
Bluetooth (A2DP); 2 × RCA unbalanced line input; 3.5 mm (1/8 in) TRS stereo unbalanced input
No balanced XLR/TRS or USB audio input is listed. IK does not publish a Bluetooth version or codec list. The 4-pin connector links the two speakers and is not a source input.
Rear switches: high shelf 0/+2 dB above 4 kHz; low shelf 0/−3 dB below 250 Hz; desktop filter (+3.5 dB 1–10 kHz, −1 dB below 400 Hz)
Set with EQ switches on the rear of the unit; no automatic room calibration is listed (IK's comparison table shows no software compatibility for this model).
56-bit DSP handling frequency and phase response and dynamic-range control; acts as a time-aligned digital crossover (bi-amplified, four Class-D amplifiers)2 sources
As stated on IK's specifications, product and comparison pages. The research record noted that IK's user manual (a PDF over the 8 MB capture limit, so not cited here) lists a paper cone; that discrepancy could not be re-checked from captured evidence.
