MSI MAG B650 TOMAHAWK WIFI

Match the exact CPU and required BIOS as well as the physical socket.

Board dimensions, not retail packaging. Check case mounting positions, clearance and cable routing.

Physical DDR5 module positions, not included modules. Consult the board manual for population order and compatible capacities.

Manufacturer capacity ceiling for this exact board, not included memory or a performance measurement. CPU, BIOS, DIMM population and the validated-module list determine support. DDR5 slots require DDR5 modules; DDR4 and DDR5 are not interchangeable.

The overclocked speed is MSI's 1DPC 1R maximum; MSI lists 1DPC 2R and 2DPC 1R up to 6400+ and 2DPC 2R up to 5400+ MHz. JEDEC default is DDR5-4800. · Manufacturer capacity ceiling for this exact board, not included memory or a performance measurement. CPU, BIOS, DIMM population and the validated-module list determine support. DDR5 slots require DDR5 modules; DDR4 and DDR5 are not interchangeable.

MSI labels these figures MHz. They are overclocking ratings, not guaranteed speeds at maximum capacity; CPU, BIOS, module ranks and population all matter.

PCI_E1 connects to the CPU; PCI_E2 (x16-length) and PCI_E3 connect to the chipset. · PCI_E1 runs at x16 with Ryzen 9000/7000, x8 with Ryzen 8700/8600/8400 and x4 with Ryzen 8500/8300. M2_3 and PCI_E2 each run at x2 when both are populated.

Onboard M.2 storage positions only. M2_2 is unavailable with Ryzen 8500/8300 processors. M2_3 and PCI_E2 each run at x2 when both are used. SATA_A1 and SATA_A2 do not support RAID.

SATA 6 Gb/s connectors, not supplied drives or power cables. M2_2 is unavailable with Ryzen 8500/8300 processors. M2_3 and PCI_E2 each run at x2 when both are used. SATA_A1 and SATA_A2 do not support RAID.

M2_1 and M2_2 connect to the CPU; M2_3 connects to the chipset. · M2_2 is unavailable with Ryzen 8500/8300 processors. M2_3 and PCI_E2 each run at x2 when both are used. SATA_A1 and SATA_A2 do not support RAID. M2_1 takes 22110/2280 drives; M2_2 and M2_3 take 2280/2260.

SATA_A1 and SATA_A2 do not support RAID. M2_2 and shared-lane restrictions still apply. Check the exact CPU, BIOS, drives and driver configuration.

Requires a processor with integrated graphics. Output limits depend on the installed CPU, display and cable; these are published interface modes, not gaming performance.

Rear-panel ports only. Link rates are manufacturer maxima, not measured transfer speeds; the USB-C label does not establish display output or laptop charging.

Counts describe supported front-panel ports, not header housings. A case with matching ports and cables is required; these are not additional rear-panel connectors.

One rear-panel Type-C connector rated up to USB 20 Gb/s; this does not imply USB4, display output or a charging wattage.

6 GHz availability depends on country rules, operating system and drivers. Link capabilities are not measured throughput.

Channel widths listed in this exact MSI specification. Allowed channels and widths depend on band, country, access point, operating system and driver. The list is not a measured throughput result or a guarantee that every width is usable in every band.

Manufacturer-listed onboard audio hardware (7.1-channel, S/PDIF output), not a measured sound-quality result.

System/chassis fan headers only. The separately listed CPU-fan and pump-fan headers are not included in this count; electrical limits require the manual.

Check MSI's exact CPU support list and its required BIOS. Family support does not confirm the firmware installed on a retail board.

MSI identifies a rear Flash BIOS button. Follow the exact board manual and firmware procedure; its presence does not establish the currently installed BIOS or out-of-box CPU support.

MSI lists four EZ Debug LEDs. These are diagnostic indicators, not a numeric POST-code display or an automatic repair guarantee.