HP OMEN Transcend 32

HP lists the viewable diagonal as 31.5" (80.32 cm).

Manufacturer typical claim; not a measured response or input-lag result.

Vertical scan frequency from the specification table; HP does not publish a separate per-input VRR window.

HP’s footnote names either DisplayPort 2.1 or HDMI 2.1 for 3840 × 2160 at 240 Hz.

HP’s typical brightness figure (nits = cd/m²); HP notes typical specifications come from component manufacturers.

OLED contrast claim; HP lists the same figure as its dynamic contrast ratio.

“Up to” 140 W on the video-capable USB-C input.

HP does not state the HDCP version.

The HP UK overview lists a SWIVEL heading with “±360”, but the HP Store UK display-features list names only height adjustment, pivot and tilt, and the HP US overview has no swivel entry. Swivel support and range are left unresolved pending confirmation.

HP’s “Physical security” row reads “None”; this is recorded as unknown rather than asserting the absence of a lock slot from that label alone.

HP UK gives 71.91 × 24.32 × 61.71 (metric) with stand; the unit (cm) and W × D × H order follow the HP Store table, whose without-stand figure (71.91 × 11.4 × 42.39 cm, W × D × H) matches the same page’s without-stand line. Converted cm→mm exactly. HP does not say whether the height is at the stand’s lowest or highest position.

24.32 cm depth with stand (W × D × H order as above); allow cable clearance.

Converted from HP’s 71.91 × 11.4 × 42.39 cm (W × D × H).

Converted from HP’s 69.95 × 39.47 cm display area.

The HP Store UK table lists only standby demand (0.5 W) and no on-mode SDR/HDR figure for this model.

HP notes that included cables may vary by country.