SPEAKERS · YOUR NEXT FACE-OFF

Edifier MR3 vs Edifier S1000MKII

Real specs. Clear sources.Exact models · UK & US buying links

Compared products

YOUR FIRST CHOICE

Edifier MR3

White

Full product profile Official image

Exact model & source notes

The MR3 is a compact active/passive monitor pair with 3.5-inch mid-low drivers and 1-inch silk-dome tweeters, rated 18 W + 18 W RMS with DRC on. It accepts balanced TRS, RCA, 3.5 mm AUX and Bluetooth 5.4, has a headphone output socket, and runs on 100–240 V mains.

Specifications checked 26 Sept 2026.

Amazon links open search results. Check the exact variant, current price and availability with the retailer.

Manufacturer specifications

WHAT DIFFERS

Bluetooth version5.45.0

Bluetooth codecsSBCaptX HD

Frequency response52 Hz–40 kHz45 Hz–40 kHz

3 of 12 verified differences, in the order listed below. Not a rating.

See the 12 verified differences

THE CONTENDER

Edifier S1000MKII

Brown

Full product profile Official image

Exact model & source notes

The S1000MKII is an active/passive bookshelf pair with a 5.5-inch aluminium-alloy mid-bass driver and 1-inch titanium-dome tweeter per side, rated 120 W RMS in total (35 W × 2 + 25 W × 2). It takes two RCA line inputs, optical, coaxial and Bluetooth 5.0 with aptX HD, controlled from rear-panel dials or a remote control.

Specifications checked 26 Sept 2026.

Amazon links open search results. Check the exact variant, current price and availability with the retailer.

Manufacturer specifications

MR3 UK & US retailers

UK & US price history: no verified listing yet

S1000MKII UK & US retailers

UK & US price history: no verified listing yet

Search links open retailer results, not a matched listing; eBay listings are checked daily. As an Amazon Associate I earn from qualifying purchases. As an eBay Partner, we may be compensated if you make a purchase.

THE DIFFERENCES, MADE VISIBLE

Visual facts

Differences first. Select a topic for its graphic, sources and conditions.

How to read this comparison

Manufacturer facts for the exact models shown. Not a quality rating or a test result.
“Different” means the known values differ, not that one is better.
Missing or conflicting evidence is marked and never counts as a difference. Source chips hold each fact’s sources and conditions.

SPECIFICATIONS SIDE BY SIDE7 topics

SELECTED TOPIC

01 / 07

Bluetooth version

Check the exact configuration and source conditions for your use.

Edifier MR35.4

Manufacturer specification

Source 1 Source 2

Edifier S1000MKII5.0

Manufacturer specification

Source 1 Source 2

Explore the full specifications

Check the exact configuration. Manufacturer specifications describe the listed variant. Confirm compatibility and the seller’s exact model before buying; no overall winner is inferred from incomplete evidence.

WHAT CHANGES BETWEEN THEM?

Key differences

Full specifications ↓

12 verified differences, most decision-relevant first. 7 are also drawn in Visual facts above. Missing information stays separate.

Bluetooth version

In Visual facts

Edifier MR35.4

Edifier S1000MKII5.0

Sources

Edifier MR3

Manufacturer specification

Edifier MR3 (UK) — product page and specification Edifier MR3 — Edifier US official store: colour variants, SKU/UPC and tech spec

Edifier S1000MKII

Manufacturer specification

Edifier S1000MKII (US) — product page and specification Edifier S1000MKII (UK) — product page and specification

Check the exact configuration and source conditions for your use.

Enclosure

In Visual facts

Edifier MR3MDF cabinet

Edifier S1000MKIIWooden enclosure with an inclined front panel

Sources

Edifier MR3

Manufacturer specification

Edifier MR3 (UK) — product page and specification

Edifier S1000MKII

Manufacturer specification

Edifier S1000MKII (US) — product page and specification Edifier S1000MKII (UK) — product page and specification Edifier S1000MKII — Edifier US official store: variant, SKU/UPC and tech spec

Check the exact configuration and source conditions for your use.

Bluetooth codecs

In Visual facts

Edifier MR3SBC

Edifier S1000MKIIaptX HD

Sources

Edifier MR3

Manufacturer specification

Edifier MR3 (UK) — product page and specification Edifier MR3 — Edifier US official store: colour variants, SKU/UPC and tech spec

Edifier S1000MKII

Manufacturer specification · Only aptX HD is named on the product page; a full codec list is not published.

Edifier S1000MKII (UK) — product page and specification

Check the exact configuration and source conditions for your use.

Frequency response

In Visual facts

Edifier MR352 Hz–40 kHz

Edifier S1000MKII45 Hz–40 kHz

Sources

Edifier MR3

Manufacturer specification · No tolerance published.

Edifier MR3 (UK) — product page and specification Edifier MR3 Studio Monitor — user manual (English section)

Edifier S1000MKII

Manufacturer specification · No tolerance published.

Edifier S1000MKII (US) — product page and specification Edifier S1000MKII Powered Bookshelf Speakers — user manual (English pages 1–13)

Check the exact configuration and source conditions for your use.

Included units / accessories

In Visual facts

Edifier MR3Active and passive speakers, power cable, speaker connecting cable, 3.5 mm–3.5 mm cable, 3.5 mm–RCA cable, manual, quick start guide and safety instructions

Edifier S1000MKIIActive and passive speakers, remote control, speaker connecting cable, RCA–RCA cable, 3.5 mm–RCA cable, fibre-optic cable and user manual

Sources

Edifier MR3

Manufacturer specification · Manual box contents; the US store list omits the power and speaker cables. No TRS cables.

Edifier MR3 — Edifier US official store: colour variants, SKU/UPC and tech spec Edifier MR3 Studio Monitor — user manual (English section)

Edifier S1000MKII

Manufacturer specification · Manual box contents plus the speakers named in the US store list; the store list omits the remote and speaker cable.

Edifier S1000MKII — Edifier US official store: variant, SKU/UPC and tech spec Edifier S1000MKII Powered Bookshelf Speakers — user manual (English pages 1–13)

Check the exact configuration and source conditions for your use.

Audio inputs

In Visual facts

Edifier MR3Balanced 1/4-inch TRS, unbalanced RCA, 3.5 mm AUX and Bluetooth 5.4 (SBC)

Edifier S1000MKIITwo RCA line inputs (Line In 1, Line In 2), optical, coaxial and Bluetooth 5.0 (aptX HD)

Sources

Edifier MR3

Manufacturer specification · All inputs including Bluetooth can be used in parallel; Bluetooth multipoint for two devices. No XLR, USB or optical input.

Edifier MR3 (UK) — product page and specification Edifier MR3 — Edifier US official store: colour variants, SKU/UPC and tech spec Edifier MR3 Studio Monitor — user manual (English section)

Edifier S1000MKII

Manufacturer specification · Optical/coaxial accept standard PCM 44.1/48/96/192 kHz. No USB, balanced or 3.5 mm socket; a coaxial cable is not supplied.

Edifier S1000MKII (US) — product page and specification Edifier S1000MKII (UK) — product page and specification Edifier S1000MKII Powered Bookshelf Speakers — user manual (English pages 1–13)

Check the exact configuration and source conditions for your use.

Show 6 more verified differences

Rated power and measurement basis

In Visual facts

Edifier MR336 W total RMS (18 W + 18 W, DRC on)

Edifier S1000MKII120 W total RMS: 25 W × 2 (treble) + 35 W × 2 (mid-range/bass)

Sources

Edifier MR3

Manufacturer specification · Manufacturer amplifier rating for the pair, stated with dynamic range control (DRC) on; load and distortion limits not stated.

Edifier MR3 (UK) — product page and specification Edifier MR3 Studio Monitor — user manual (English section)

Edifier S1000MKII

Manufacturer specification · Manufacturer amplifier rating for the pair, per band and channel; load and distortion limits not stated.

Edifier S1000MKII (US) — product page and specification Edifier S1000MKII (UK) — product page and specification Edifier S1000MKII Powered Bookshelf Speakers — user manual (English pages 1–13)

Check the exact configuration and source conditions for your use.

Power supply

Edifier MR3Mains AC input 100–240 V~ 50/60 Hz, 300 mA, via the supplied power cable

Edifier S1000MKIIMains-powered: fixed power cable and power switch on the active speaker (Class II, double-insulated); operating voltage printed on the product plate

Sources

Edifier MR3

Manufacturer specification · Universal-voltage rating in the English manual; the manual marks the plug drawing as illustrative. The regional plug/cable type is not published.

Edifier MR3 Studio Monitor — user manual (English section)

Edifier S1000MKII

Manufacturer specification · Edifier publishes no rated mains voltage/frequency for this model on its UK or US pages or in the English manual; the manual says the correct operating voltage is on the product plate. Regional packaging and mains rating are not published; do not assume cross-region compatibility.

Edifier S1000MKII Powered Bookshelf Speakers — user manual (English pages 1–13)

Check the exact configuration and source conditions for your use.

Signal-to-noise ratio

Edifier MR3≥85 dB(A)

Edifier S1000MKII≥90 dB(A)

Sources

Edifier MR3

Manufacturer specification

Edifier MR3 (UK) — product page and specification Edifier MR3 — Edifier US official store: colour variants, SKU/UPC and tech spec

Edifier S1000MKII

Manufacturer specification

Edifier S1000MKII (US) — product page and specification Edifier S1000MKII (UK) — product page and specification

Check the exact configuration and source conditions for your use.

Tone controls

Edifier MR3High knob ±6 dB above 10 kHz; Low knob ±6 dB around 125 Hz; app low-cut, acoustic-space and desktop-control settings

Edifier S1000MKIITreble and bass controls plus volume/input dial on the active speaker's rear panel

Sources

Edifier MR3

Manufacturer specification

Edifier MR3 Studio Monitor — user manual (English section)

Edifier S1000MKII

Manufacturer specification

Edifier S1000MKII Powered Bookshelf Speakers — user manual (English pages 1–13)

Check the exact configuration and source conditions for your use.

Woofer size

Edifier MR33.5 in

Edifier S1000MKII5.5 in

Sources

Edifier MR3

Manufacturer specification · Mid-low driver.

Edifier MR3 (UK) — product page and specification Edifier MR3 — Edifier US official store: colour variants, SKU/UPC and tech spec

Edifier S1000MKII

Manufacturer specification · Mid-range/bass driver with aluminium alloy diaphragm.

Edifier S1000MKII (US) — product page and specification Edifier S1000MKII (UK) — product page and specification

Check the exact configuration and source conditions for your use.

Dimensions of each unit

Edifier MR3Active: 125.5 × 220 × 185 mm; passive: 125.5 × 220 × 176 mm (W × H × D)

Edifier S1000MKII198 × 343 × 276 mm (W × H × D), per speaker

Sources

Edifier MR3

Manufacturer specification

Edifier MR3 (UK) — product page and specification Edifier MR3 — Edifier US official store: colour variants, SKU/UPC and tech spec

Edifier S1000MKII

Manufacturer specification · Edifier states the figure applies per speaker; separate active/passive dimensions are not published.

Edifier S1000MKII (US) — product page and specification Edifier S1000MKII (UK) — product page and specification Edifier S1000MKII — Edifier US official store: variant, SKU/UPC and tech spec

A size or weight trade-off; it does not establish the better product.

Missing or non-comparable evidence (8)

Amplifier type

Edifier MR3Not verified

Edifier S1000MKIIDual digital-input Class-D amplifiers (one for the treble signals, one for the mid-range/bass signals); DSP-based electronic crossovers and dynamic range control

Sources

Edifier MR3

No source recorded for this side.

Edifier S1000MKII

Manufacturer specification · Edifier: the amplifiers support stereo signals up to 192kHz with PWM frequency up to 768kHz; a stereo audio codec with embedded miniDSP performs the dynamic range management and active crossover control; a digital audio interface transceiver (DIX) handles digital signals up to 24bit/216kHz, and its integrated ADC converts analogue signals at up to 24bit/96kHz.

Edifier S1000MKII (US) — product page and specification Edifier S1000MKII (UK) — product page and specification Edifier S1000MKII — Edifier US official store: variant, SKU/UPC and tech spec

Evidence is missing or conflicting on at least one side. This is not a verified difference.

App

Edifier MR3EDIFIER ConneX (playback control for Bluetooth input, master volume, sound effects and custom EQ, acoustic tuning, firmware upgrades)

Edifier S1000MKIINot verified

Sources

Edifier MR3

Manufacturer specification

Edifier MR3 (US) — product page and specification Edifier MR3 (UK) — product page and specification Edifier MR3 Studio Monitor — user manual (English section)

Edifier S1000MKII

No source recorded for this side.

Evidence is missing or conflicting on at least one side. This is not a verified difference.

Headphone output

Edifier MR33.5 mm stereo headphone output; connecting headphones mutes the speakers

Edifier S1000MKIINot verified

Sources

Edifier MR3

Manufacturer specification

Edifier MR3 — Edifier US official store: colour variants, SKU/UPC and tech spec Edifier MR3 Studio Monitor — user manual (English section)

Edifier S1000MKII

No source recorded for this side.

Evidence is missing or conflicting on at least one side. This is not a verified difference.

Input sensitivity

Edifier MR3TRS: 1228 ± 100 mV (+4 dBu); RCA: 775 ± 50 mV; AUX: 775 ± 50 mV; Bluetooth: 800 ± 50 mFFS

Edifier S1000MKIINot verified

Sources

Edifier MR3

Manufacturer specification

Edifier MR3 (US) — product page and specification Edifier MR3 (UK) — product page and specification

Edifier S1000MKII

No source recorded for this side.

Evidence is missing or conflicting on at least one side. This is not a verified difference.

Maximum SPL

Edifier MR392.5 dB at 1 m (peak)

Edifier S1000MKIINot verified

Sources

Edifier MR3

Manufacturer specification

Edifier MR3 (UK) — product page and specification

Edifier S1000MKII

No source recorded for this side.

Evidence is missing or conflicting on at least one side. This is not a verified difference.

Remote control

Edifier MR3Not verified

Edifier S1000MKIIpower on/off, mute, Bluetooth input, previous/next track and pause/play (Bluetooth input), volume up/down, and direct Line in 1/Line in 2/Optical/Coaxial input

Sources

Edifier MR3

No source recorded for this side.

Edifier S1000MKII

Manufacturer specification · Point the remote at the speaker's remote receiving window; Edifier gives an optimum operational distance of 7 metres. Source field: Remote control.

Edifier S1000MKII Powered Bookshelf Speakers — user manual (English pages 1–13)

Evidence is missing or conflicting on at least one side. This is not a verified difference.

UK PSTI defined support period

Edifier MR37 years, to 22 April 2031

Edifier S1000MKIINot verified

Sources

Edifier MR3

Manufacturer specification · Edifier's UK PSTI 2023 statement of compliance for EDF100081 (MR3), dated 2024-4-28.

Edifier MR3 — UK PSTI 2023 statement of compliance (EDF100081)

Edifier S1000MKII

No source recorded for this side.

Evidence is missing or conflicting on at least one side. This is not a verified difference.

Weight

Edifier MR3Not verified

Edifier S1000MKIINot verified

Sources

Edifier MR3

Edifier lists 'Net Weight: 3.85kg' for this active/passive product without stating whether it is the pair or one speaker (dimensions are given per speaker or per cabinet), so no like-for-like weight is asserted. · Manufacturer specification

Edifier MR3 (UK) — product page and specification Edifier MR3 — Edifier US official store: colour variants, SKU/UPC and tech spec

Edifier S1000MKII

Edifier lists 'Net Weight: 16.7kg' for this active/passive product without stating whether it is the pair or one speaker (dimensions are given per speaker or per cabinet), so no like-for-like weight is asserted. · Manufacturer specification

Edifier S1000MKII (US) — product page and specification Edifier S1000MKII (UK) — product page and specification

Evidence is missing or conflicting on at least one side. This is not a verified difference.

3 shared fields have the same recorded value.

WHAT EACH CHOICE ASKS OF YOU

What it brings and what to check

Edifier MR3

What it brings

Balanced TRS, RCA, AUX and Bluetooth can be connected in parallel, with two-device Bluetooth multipoint.
Manufacturer source Manufacturer source
Each cabinet is 125.5 mm wide and at most 185 mm deep, and Edifier lists a 3.85 kg net weight.
Manufacturer source

What to check

Bluetooth is SBC only, and there is no XLR, USB or optical input.
Manufacturer source
The 3.5-inch drivers are rated down to 52 Hz with no tolerance given.
Manufacturer source Manufacturer source

Edifier S1000MKII

What it brings

Optical and coaxial inputs accept PCM up to 192 kHz, alongside two RCA line inputs and aptX HD Bluetooth.
Manufacturer source Manufacturer source
Rated 45 Hz–40 kHz with a stated signal-to-noise ratio of ≥90 dB(A).
Manufacturer source

What to check

Each cabinet is 198 × 343 × 276 mm, and Edifier gives a 16.7 kg net weight.
Manufacturer source
Tone and input dials are on the active speaker's rear panel; there is no USB, balanced or 3.5 mm socket, and no coaxial cable is supplied.
Manufacturer source

COMPARE THE DETAILS

Full specifications

How we verify

Differences only

23 of 23 specifications Sources in each row

Source-backed specifications for Edifier MR3 and Edifier S1000MKII
Specification	Edifier MR3	Edifier S1000MKII

Channel configuration Sources Edifier MR3 Manufacturer specification Edifier MR3 — Edifier US official store: colour variants, SKU/UPC and tech spec Edifier MR3 Studio Monitor — user manual (English section) Edifier S1000MKII Manufacturer specification · The passive speaker connects to the active speaker's 'Connect to passive speaker' terminal with the supplied speaker connecting cable. Edifier S1000MKII Powered Bookshelf Speakers — user manual (English pages 1–13)	Stereo pair: one active speaker and one passive speaker	Stereo pair: one active speaker and one passive speaker
Woofer sizeDifferent Sources Edifier MR3 Manufacturer specification · Mid-low driver. Edifier MR3 (UK) — product page and specification Edifier MR3 — Edifier US official store: colour variants, SKU/UPC and tech spec Edifier S1000MKII Manufacturer specification · Mid-range/bass driver with aluminium alloy diaphragm. Edifier S1000MKII (US) — product page and specification Edifier S1000MKII (UK) — product page and specification	3.5 in	5.5 in
Tweeter size Sources Edifier MR3 Manufacturer specification · Silk dome. Edifier MR3 (UK) — product page and specification Edifier MR3 — Edifier US official store: colour variants, SKU/UPC and tech spec Edifier S1000MKII Manufacturer specification · Titanium dome. Edifier S1000MKII (US) — product page and specification Edifier S1000MKII (UK) — product page and specification	1 in	1 in

Frequency responseDifferent Sources Edifier MR3 Manufacturer specification · No tolerance published. Edifier MR3 (UK) — product page and specification Edifier MR3 Studio Monitor — user manual (English section) Edifier S1000MKII Manufacturer specification · No tolerance published. Edifier S1000MKII (US) — product page and specification Edifier S1000MKII Powered Bookshelf Speakers — user manual (English pages 1–13)	52 Hz–40 kHz	45 Hz–40 kHz
Signal-to-noise ratioDifferent Sources Edifier MR3 Manufacturer specification Edifier MR3 (UK) — product page and specification Edifier MR3 — Edifier US official store: colour variants, SKU/UPC and tech spec Edifier S1000MKII Manufacturer specification Edifier S1000MKII (US) — product page and specification Edifier S1000MKII (UK) — product page and specification	≥85 dB(A)	≥90 dB(A)
Maximum SPL Sources Edifier MR3 Manufacturer specification Edifier MR3 (UK) — product page and specification Edifier S1000MKII No source recorded.	92.5 dB at 1 m (peak)	Not provided

Audio inputsDifferent Sources Edifier MR3 Manufacturer specification · All inputs including Bluetooth can be used in parallel; Bluetooth multipoint for two devices. No XLR, USB or optical input. Edifier MR3 (UK) — product page and specification Edifier MR3 — Edifier US official store: colour variants, SKU/UPC and tech spec Edifier MR3 Studio Monitor — user manual (English section) Edifier S1000MKII Manufacturer specification · Optical/coaxial accept standard PCM 44.1/48/96/192 kHz. No USB, balanced or 3.5 mm socket; a coaxial cable is not supplied. Edifier S1000MKII (US) — product page and specification Edifier S1000MKII (UK) — product page and specification Edifier S1000MKII Powered Bookshelf Speakers — user manual (English pages 1–13)	Balanced 1/4-inch TRS, unbalanced RCA, 3.5 mm AUX and Bluetooth 5.4 (SBC)	Two RCA line inputs (Line In 1, Line In 2), optical, coaxial and Bluetooth 5.0 (aptX HD)
Input sensitivity Sources Edifier MR3 Manufacturer specification Edifier MR3 (US) — product page and specification Edifier MR3 (UK) — product page and specification Edifier S1000MKII No source recorded.	TRS: 1228 ± 100 mV (+4 dBu); RCA: 775 ± 50 mV; AUX: 775 ± 50 mV; Bluetooth: 800 ± 50 mFFS	Not provided
Bluetooth versionDifferent Sources Edifier MR3 Manufacturer specification Edifier MR3 (UK) — product page and specification Edifier MR3 — Edifier US official store: colour variants, SKU/UPC and tech spec Edifier S1000MKII Manufacturer specification Edifier S1000MKII (US) — product page and specification Edifier S1000MKII (UK) — product page and specification	5.4	5.0
Bluetooth codecsDifferent Sources Edifier MR3 Manufacturer specification Edifier MR3 (UK) — product page and specification Edifier MR3 — Edifier US official store: colour variants, SKU/UPC and tech spec Edifier S1000MKII Manufacturer specification · Only aptX HD is named on the product page; a full codec list is not published. Edifier S1000MKII (UK) — product page and specification	SBC	aptX HD
Headphone output Sources Edifier MR3 Manufacturer specification Edifier MR3 — Edifier US official store: colour variants, SKU/UPC and tech spec Edifier MR3 Studio Monitor — user manual (English section) Edifier S1000MKII No source recorded.	3.5 mm stereo headphone output; connecting headphones mutes the speakers	Not provided

Rated power and measurement basisDifferent Sources Edifier MR3 Manufacturer specification · Manufacturer amplifier rating for the pair, stated with dynamic range control (DRC) on; load and distortion limits not stated. Edifier MR3 (UK) — product page and specification Edifier MR3 Studio Monitor — user manual (English section) Edifier S1000MKII Manufacturer specification · Manufacturer amplifier rating for the pair, per band and channel; load and distortion limits not stated. Edifier S1000MKII (US) — product page and specification Edifier S1000MKII (UK) — product page and specification Edifier S1000MKII Powered Bookshelf Speakers — user manual (English pages 1–13)	36 W total RMS (18 W + 18 W, DRC on)	120 W total RMS: 25 W × 2 (treble) + 35 W × 2 (mid-range/bass)
Power supplyDifferent Sources Edifier MR3 Manufacturer specification · Universal-voltage rating in the English manual; the manual marks the plug drawing as illustrative. The regional plug/cable type is not published. Edifier MR3 Studio Monitor — user manual (English section) Edifier S1000MKII Manufacturer specification · Edifier publishes no rated mains voltage/frequency for this model on its UK or US pages or in the English manual; the manual says the correct operating voltage is on the product plate. Regional packaging and mains rating are not published; do not assume cross-region compatibility. Edifier S1000MKII Powered Bookshelf Speakers — user manual (English pages 1–13)	Mains AC input 100–240 V~ 50/60 Hz, 300 mA, via the supplied power cable	Mains-powered: fixed power cable and power switch on the active speaker (Class II, double-insulated); operating voltage printed on the product plate
Amplifier type Sources Edifier MR3 No source recorded. Edifier S1000MKII Manufacturer specification · Edifier: the amplifiers support stereo signals up to 192kHz with PWM frequency up to 768kHz; a stereo audio codec with embedded miniDSP performs the dynamic range management and active crossover control; a digital audio interface transceiver (DIX) handles digital signals up to 24bit/216kHz, and its integrated ADC converts analogue signals at up to 24bit/96kHz. Edifier S1000MKII (US) — product page and specification Edifier S1000MKII (UK) — product page and specification Edifier S1000MKII — Edifier US official store: variant, SKU/UPC and tech spec	Not provided	Dual digital-input Class-D amplifiers (one for the treble signals, one for the mid-range/bass signals); DSP-based electronic crossovers and dynamic range control

Tone controlsDifferent Sources Edifier MR3 Manufacturer specification Edifier MR3 Studio Monitor — user manual (English section) Edifier S1000MKII Manufacturer specification Edifier S1000MKII Powered Bookshelf Speakers — user manual (English pages 1–13)	High knob ±6 dB above 10 kHz; Low knob ±6 dB around 125 Hz; app low-cut, acoustic-space and desktop-control settings	Treble and bass controls plus volume/input dial on the active speaker's rear panel
App Sources Edifier MR3 Manufacturer specification Edifier MR3 (US) — product page and specification Edifier MR3 (UK) — product page and specification Edifier MR3 Studio Monitor — user manual (English section) Edifier S1000MKII No source recorded.	EDIFIER ConneX (playback control for Bluetooth input, master volume, sound effects and custom EQ, acoustic tuning, firmware upgrades)	Not provided
UK PSTI defined support period Sources Edifier MR3 Manufacturer specification · Edifier's UK PSTI 2023 statement of compliance for EDF100081 (MR3), dated 2024-4-28. Edifier MR3 — UK PSTI 2023 statement of compliance (EDF100081) Edifier S1000MKII No source recorded.	7 years, to 22 April 2031	Not provided
Remote control Sources Edifier MR3 No source recorded. Edifier S1000MKII Manufacturer specification · Point the remote at the speaker's remote receiving window; Edifier gives an optimum operational distance of 7 metres. Source field: Remote control. Edifier S1000MKII Powered Bookshelf Speakers — user manual (English pages 1–13)	Not provided	power on/off, mute, Bluetooth input, previous/next track and pause/play (Bluetooth input), volume up/down, and direct Line in 1/Line in 2/Optical/Coaxial input

Dimensions of each unitDifferent Sources Edifier MR3 Manufacturer specification Edifier MR3 (UK) — product page and specification Edifier MR3 — Edifier US official store: colour variants, SKU/UPC and tech spec Edifier S1000MKII Manufacturer specification · Edifier states the figure applies per speaker; separate active/passive dimensions are not published. Edifier S1000MKII (US) — product page and specification Edifier S1000MKII (UK) — product page and specification Edifier S1000MKII — Edifier US official store: variant, SKU/UPC and tech spec	Active: 125.5 × 220 × 185 mm; passive: 125.5 × 220 × 176 mm (W × H × D)	198 × 343 × 276 mm (W × H × D), per speaker
EnclosureDifferent Sources Edifier MR3 Manufacturer specification Edifier MR3 (UK) — product page and specification Edifier S1000MKII Manufacturer specification Edifier S1000MKII (US) — product page and specification Edifier S1000MKII (UK) — product page and specification Edifier S1000MKII — Edifier US official store: variant, SKU/UPC and tech spec	MDF cabinet	Wooden enclosure with an inclined front panel

Included units / accessoriesDifferent Sources Edifier MR3 Manufacturer specification · Manual box contents; the US store list omits the power and speaker cables. No TRS cables. Edifier MR3 — Edifier US official store: colour variants, SKU/UPC and tech spec Edifier MR3 Studio Monitor — user manual (English section) Edifier S1000MKII Manufacturer specification · Manual box contents plus the speakers named in the US store list; the store list omits the remote and speaker cable. Edifier S1000MKII — Edifier US official store: variant, SKU/UPC and tech spec Edifier S1000MKII Powered Bookshelf Speakers — user manual (English pages 1–13)	Active and passive speakers, power cable, speaker connecting cable, 3.5 mm–3.5 mm cable, 3.5 mm–RCA cable, manual, quick start guide and safety instructions	Active and passive speakers, remote control, speaker connecting cable, RCA–RCA cable, 3.5 mm–RCA cable, fibre-optic cable and user manual
Hi-Res Audio certification Sources Edifier MR3 Manufacturer specification · Edifier states 24bit/96kHz high-resolution audio processing: the analog audio front end and the Texas Instruments Class-D amplifier are configured to work at 24bit/96kHz. Edifier MR3 (US) — product page and specification Edifier MR3 (UK) — product page and specification Edifier MR3 — Edifier US official store: colour variants, SKU/UPC and tech spec Edifier S1000MKII Manufacturer specification · Edifier states support for digital audio signals with a bit depth and sampling rate up to 24bit/192kHz. Over Bluetooth, aptX HD is quoted at up to 24bit/48kHz. Edifier S1000MKII (US) — product page and specification Edifier S1000MKII (UK) — product page and specification Edifier S1000MKII — Edifier US official store: variant, SKU/UPC and tech spec	Hi-Res Audio certified	Hi-Res AUDIO certified

Show unverified (1)Not verified, not provided or conflicting for both products. Kept for completeness; never counted as a difference.

Specifications without verified values for either product
Weight Sources Edifier MR3 Edifier lists 'Net Weight: 3.85kg' for this active/passive product without stating whether it is the pair or one speaker (dimensions are given per speaker or per cabinet), so no like-for-like weight is asserted. · Manufacturer specification Edifier MR3 (UK) — product page and specification Edifier MR3 — Edifier US official store: colour variants, SKU/UPC and tech spec Edifier S1000MKII Edifier lists 'Net Weight: 16.7kg' for this active/passive product without stating whether it is the pair or one speaker (dimensions are given per speaker or per cabinet), so no like-for-like weight is asserted. · Manufacturer specification Edifier S1000MKII (US) — product page and specification Edifier S1000MKII (UK) — product page and specification	Not listed by the manufacturer	Not listed by the manufacturer

First product manufacturer source Second product manufacturer source

FIND YOUR CONTENDERS

More products

Closest speakers to this pair by shared key specifications. Not a popularity ranking.

See all 162 speakers

Logitech Z207

Channel configuration: 2.0 stereo pair: two powered speakers, each with a full-range driver and a passive radiator
Rated power and measurement basis: 5 W RMS total; 10 W peak total
Audio inputs: Bluetooth (up to two paired source devices, Easy-Switch) and one 3.5 mm analogue auxiliary input on the back of the right speaker

Prices & product profile

Logitech Z313

Channel configuration: 2.1: two satellite speakers and a subwoofer, with a wired control pod
Rated power and measurement basis: 25 W RMS total: subwoofer 15 W + satellites 2 × 5 W; 50 W peak
Audio inputs: One wired 3.5 mm analogue connection

Prices & product profile

Yamaha HS5

Channel configuration: One individually packaged, two-way bi-amplified powered monitor (not a stereo pair)
Rated power and measurement basis: 70 W total (dynamic power): LF 45 W into 4 ohms + HF 25 W into 8 ohms
Audio inputs: Balanced XLR (XLR-3-31) and balanced 6.35 mm phone jack, wired in parallel

Prices & product profile

Yamaha HS7

Channel configuration: One individually packaged, two-way bi-amplified powered monitor (not a stereo pair)
Rated power and measurement basis: 95 W total (dynamic power): LF 60 W into 4 ohms + HF 35 W into 8 ohms
Audio inputs: Balanced XLR (XLR-3-31) and balanced 6.35 mm phone jack, wired in parallel

Prices & product profile

Each record represents an explicitly checked model and configuration. Original import: 5 Sept 2026; this is not its verification date. This is not a list of current offers or a popularity ranking.