5 verified differences, led by Touch controls, manufacturer-listed box contents and supported audio sources and streaming inputs. Compared in full below. Not a rating.
The Pebble V3 is a 2.0 pair of small spherical desktop speakers that take both power and audio over a single USB-C cable. Each has a 2.25-inch full-range driver with a passive radiator, and Creative rates the pair at up to 8 W RMS when fed from a 10 W USB-C or 5 V 2 A source on high gain.
Specifications checked 26 Sept 2026.
Amazon links open search results. Check the exact variant, current price and availability with the retailer.
Search links open retailer results, not a matched listing; eBay listings are checked daily. As an Amazon Associate I earn from qualifying purchases. As an eBay Partner, we may be compensated if you make a purchase.
THE DIFFERENCES, MADE VISIBLE
Visual facts
Differences first. Select a topic for its graphic, sources and conditions.
How to read this comparison
Manufacturer facts for the exact models shown. Not a quality rating or a test result.
“Different” means the known values differ, not that one is better.
Missing or conflicting evidence is marked and never counts as a difference. Source chips hold each fact’s sources and conditions.
SPECIFICATIONS SIDE BY SIDE5 topics
SELECTED TOPIC
01 / 05
Touch controls
Check the exact configuration and source conditions for your use.
Apple HomePodTap Play/Pause Double-tap Skip Triple-tap Skip back Touch and hold Siri Tap or hold + or - Volume up/down
Creative Pebble V3Volume control knob and Bluetooth button; H/A gain switch on the bottom of the right speaker
Manufacturer specification · The gain switch defaults to 'H'; Creative suggests switching it from 'H' to 'A' if the connected device cannot power the speakers (crackling). Pressing and holding the Bluetooth button beside the volume control knob starts pairing. Creative's specification table lists 'Controls: Volume'.
Check the exact configuration. Manufacturer specifications describe the listed variant. Confirm compatibility and the seller’s exact model before buying; no overall winner is inferred from incomplete evidence.
Manufacturer specification · The gain switch defaults to 'H'; Creative suggests switching it from 'H' to 'A' if the connected device cannot power the speakers (crackling). Pressing and holding the Bluetooth button beside the volume control knob starts pairing. Creative's specification table lists 'Controls: Volume'.
Apple HomePodApple Music iTunes music purchases iCloud Music Library with an Apple Music or iTunes Match subscription Third-party music services Apple Music Radio or episodes on demand Radio stations from TuneIn, Capital FM, LBC UK, Heart UK and Smooth UK Apple Podcasts News briefings Remastered ambient sounds AirPlay to share other content to HomePod from iPhone, iPad, Apple TV or Mac
Creative Pebble V3USB audio (USB-C), Bluetooth 5.0 and 3.5 mm AUX-in
Sources
Apple HomePod
Manufacturer specification · A subscription is required for Apple Music. A subscription may be required for music streaming services.
Manufacturer specification · The speakers must be powered over USB even when used with Bluetooth or AUX. No codec list beyond Bluetooth version is published.
Apple HomePodLine voltage: 100V to 240V AC Frequency: 50Hz to 60Hz Operating temperature: 0° to 35° C (32° to 95° F) Relative humidity: 5% to 90% non-condensing Operating altitude: tested up to 3,000 metres (10,000 feet)
Creative Pebble V3USB bus power over the USB-C cable (5 V 2 A or 10 W USB-C port recommended) or a USB power adapter; no battery and no mains supply included
Sources
Apple HomePod
Manufacturer specification · Adapter/input ratings are requirements, not measured consumption or audio output.
Manufacturer specification · A power adapter and AUX cable are not included. Creative publishes the same USB power specification on its UK and US pages, so there is no mains/plug variant.
Apple HomePod142 mm wide (5.6 inches) 168 mm high (6.6 inches) Weight: 2.3 kg (5.16 pounds)
Creative Pebble V3123 × 120 × 118 mm, each speaker (left and right)
Sources
Apple HomePod
Manufacturer specification · Only the dimensions explicitly labelled by the manufacturer are listed; no missing axis is inferred. Size and weight vary by manufacturing process.
Evidence is missing or conflicting on at least one side. This is not a verified difference.
Phone, software and network requirements
Apple HomePodHomePod with the latest software version iPhone SE (2nd generation or later) or iPhone 8 or later with the latest version of iOS; or iPad Pro, iPad (5th generation or later), iPad Air (3rd generation or later) or iPad mini (5th generation or later) with the latest version of iPadOS 802.11 Wi-Fi internet access
Evidence is missing or conflicting on at least one side. This is not a verified difference.
Rated channel configuration
Apple HomePodNot verified
Creative Pebble V32.0 stereo pair of powered desktop speakers (left and right satellites joined by a 1.35 m right-to-left speaker cable)
Sources
Apple HomePod
Not listed by the manufacturer in the cited technical specifications. · Manufacturer specification · Driver layout and supported audio formats are listed separately; neither establishes a rated channel configuration for one unit.
Evidence is missing or conflicting on at least one side. This is not a verified difference.
Wireless connections
Apple HomePod802.11n Wi-Fi Peer-to-peer discovery for easy guest access Bluetooth 5.0 Thread networking technology Ultra Wideband chip for device proximity
Creative Pebble V3Not verified
Sources
Apple HomePod
Manufacturer specification · Bluetooth presence alone does not establish Bluetooth audio input; supported audio sources are listed separately. Peer-to-peer AirPlay requires a Mac (2012 or later) with OS X Yosemite or later, or an iOS device (late 2012 or later) with iOS 8 or later. Compatible with HomeKit- or Matter-enabled Thread accessories only. Thread-based accessories require a Thread-enabled home hub, such as Apple TV 4K, HomePod (2nd generation), HomePod mini or a third-party Thread border router. Requires a U1‑equipped iPhone with iOS 16.2 or later.
Evidence is missing or conflicting on at least one side. This is not a verified difference.
Driver layout and audio processing
Apple HomePod4-inch high-excursion woofer Array of five horn-loaded tweeters, each with its own neodymium magnet Internal low-frequency calibration microphone for automatic bass correction Advanced computational audio with system sensing for real-time tuning Room sensing Spatial Audio with Dolby Atmos for music and video Four-microphone design for far-field Siri Sound Recognition for smoke and carbon monoxide alarm sounds Multi-room audio with AirPlay Stereo pair capable
Creative Pebble V3Not verified
Sources
Apple HomePod
Manufacturer specification · Spatial Audio works with compatible content in supported apps on HomePod (1st and 2nd generation). Not all content is available in Dolby Atmos. Requires Apple TV 4K. Apple TV 4K sold separately. Sound Recognition may detect smoke and carbon monoxide alarm sounds and send you notifications when recognised. Sound Recognition should not be relied upon in circumstances where you may be harmed or injured, or in high-risk or emergency situations. Sound Recognition requires the updated Home architecture, which is available as a separate update in the Home app. It requires all Apple devices that access the home to be using the latest software. Requires multiple HomePod speakers or or AirPlay-compatible speakers with the latest AirPlay software. Creating a HomePod stereo pair requires two of the same model HomePod speakers, such as two HomePod mini, two HomePod (2nd generation) or two HomePod (1st generation).
Evidence is missing or conflicting on at least one side. This is not a verified difference.
Driver size
Apple HomePodNot verified
Creative Pebble V32.25 in
Sources
Apple HomePod
No source recorded for this side.
Creative Pebble V3
Manufacturer specification · One full-range driver per speaker, with a passive radiator. Creative describes 45° elevated drivers angled to direct audio to the listener's ears.
Evidence is missing or conflicting on at least one side. This is not a verified difference.
Rated audio output power and measurement basis
Apple HomePodNot verified
Creative Pebble V3Up to 8 W RMS total (2 × 4 W RMS); 16 W peak
Sources
Apple HomePod
Not listed by the manufacturer in the cited technical specifications. · Manufacturer specification · The manufacturer does not list rated speaker output in watts. An adapter rating or AC input frequency is not audio output power.
Manufacturer specification · Creative's rating applies with a 10 W USB-C port or USB-C power adapter, or a 5 V 2 A USB-A adapter, with gain set to High; lower-power USB ports give less output. Not a loudness measurement.
Evidence is missing or conflicting on at least one side. This is not a verified difference.
Manufacturer-listed sensors
Apple HomePodTemperature and humidity Accelerometer
Creative Pebble V3Not verified
Sources
Apple HomePod
Manufacturer specification · Temperature and humidity sensing is optimised for indoor domestic settings, when ambient temperatures are around 15º C to 30º C and relative humidity is around 30% to 70%. Accuracy may decrease in some situations where audio is playing for an extended period of time at high volume levels. HomePod requires some time to calibrate the sensors immediately after starting up before results are displayed.
Creative publishes only per-speaker weights (left 310 g, right 360 g), no pair or system weight; the per-speaker figures are recorded separately and are not summed. · Manufacturer specification
Source-backed specifications for Apple HomePod and Creative Pebble V3
Specification
Apple HomePod
Creative Pebble V3
Rated channel configurationSources
Apple HomePod
Not listed by the manufacturer in the cited technical specifications. · Manufacturer specification · Driver layout and supported audio formats are listed separately; neither establishes a rated channel configuration for one unit.
2.0 stereo pair of powered desktop speakers (left and right satellites joined by a 1.35 m right-to-left speaker cable)
Driver sizeSources
Apple HomePod
No source recorded.
Creative Pebble V3
Manufacturer specification · One full-range driver per speaker, with a passive radiator. Creative describes 45° elevated drivers angled to direct audio to the listener's ears.
Manufacturer specification · The speakers must be powered over USB even when used with Bluetooth or AUX. No codec list beyond Bluetooth version is published.
Apple Music iTunes music purchases iCloud Music Library with an Apple Music or iTunes Match subscription Third-party music services Apple Music Radio or episodes on demand Radio stations from TuneIn, Capital FM, LBC UK, Heart UK and Smooth UK Apple Podcasts News briefings Remastered ambient sounds AirPlay to share other content to HomePod from iPhone, iPad, Apple TV or Mac
USB audio (USB-C), Bluetooth 5.0 and 3.5 mm AUX-in
Wireless connectionsSources
Apple HomePod
Manufacturer specification · Bluetooth presence alone does not establish Bluetooth audio input; supported audio sources are listed separately. Peer-to-peer AirPlay requires a Mac (2012 or later) with OS X Yosemite or later, or an iOS device (late 2012 or later) with iOS 8 or later. Compatible with HomeKit- or Matter-enabled Thread accessories only. Thread-based accessories require a Thread-enabled home hub, such as Apple TV 4K, HomePod (2nd generation), HomePod mini or a third-party Thread border router. Requires a U1‑equipped iPhone with iOS 16.2 or later.
Rated audio output power and measurement basisSources
Apple HomePod
Not listed by the manufacturer in the cited technical specifications. · Manufacturer specification · The manufacturer does not list rated speaker output in watts. An adapter rating or AC input frequency is not audio output power.
Manufacturer specification · Creative's rating applies with a 10 W USB-C port or USB-C power adapter, or a 5 V 2 A USB-A adapter, with gain set to High; lower-power USB ports give less output. Not a loudness measurement.
Manufacturer specification · A power adapter and AUX cable are not included. Creative publishes the same USB power specification on its UK and US pages, so there is no mains/plug variant.
Line voltage: 100V to 240V AC Frequency: 50Hz to 60Hz Operating temperature: 0° to 35° C (32° to 95° F) Relative humidity: 5% to 90% non-condensing Operating altitude: tested up to 3,000 metres (10,000 feet)
USB bus power over the USB-C cable (5 V 2 A or 10 W USB-C port recommended) or a USB power adapter; no battery and no mains supply included
Driver layout and audio processingSources
Apple HomePod
Manufacturer specification · Spatial Audio works with compatible content in supported apps on HomePod (1st and 2nd generation). Not all content is available in Dolby Atmos. Requires Apple TV 4K. Apple TV 4K sold separately. Sound Recognition may detect smoke and carbon monoxide alarm sounds and send you notifications when recognised. Sound Recognition should not be relied upon in circumstances where you may be harmed or injured, or in high-risk or emergency situations. Sound Recognition requires the updated Home architecture, which is available as a separate update in the Home app. It requires all Apple devices that access the home to be using the latest software. Requires multiple HomePod speakers or or AirPlay-compatible speakers with the latest AirPlay software. Creating a HomePod stereo pair requires two of the same model HomePod speakers, such as two HomePod mini, two HomePod (2nd generation) or two HomePod (1st generation).
4-inch high-excursion woofer Array of five horn-loaded tweeters, each with its own neodymium magnet Internal low-frequency calibration microphone for automatic bass correction Advanced computational audio with system sensing for real-time tuning Room sensing Spatial Audio with Dolby Atmos for music and video Four-microphone design for far-field Siri Sound Recognition for smoke and carbon monoxide alarm sounds Multi-room audio with AirPlay Stereo pair capable
HomePod with the latest software version iPhone SE (2nd generation or later) or iPhone 8 or later with the latest version of iOS; or iPad Pro, iPad (5th generation or later), iPad Air (3rd generation or later) or iPad mini (5th generation or later) with the latest version of iPadOS 802.11 Wi-Fi internet access
Not provided
Manufacturer-listed sensorsSources
Apple HomePod
Manufacturer specification · Temperature and humidity sensing is optimised for indoor domestic settings, when ambient temperatures are around 15º C to 30º C and relative humidity is around 30% to 70%. Accuracy may decrease in some situations where audio is playing for an extended period of time at high volume levels. HomePod requires some time to calibrate the sensors immediately after starting up before results are displayed.
Manufacturer specification · The gain switch defaults to 'H'; Creative suggests switching it from 'H' to 'A' if the connected device cannot power the speakers (crackling). Pressing and holding the Bluetooth button beside the volume control knob starts pairing. Creative's specification table lists 'Controls: Volume'.
Clear Dialog and Surround, Powered by Sound Blaster
Manufacturer-listed dimensions and massDifferentSources
Apple HomePod
Manufacturer specification · Only the dimensions explicitly labelled by the manufacturer are listed; no missing axis is inferred. Size and weight vary by manufacturing process.
Creative publishes only per-speaker weights (left 310 g, right 360 g), no pair or system weight; the per-speaker figures are recorded separately and are not summed. · Manufacturer specification
Each record represents an explicitly checked model and configuration. Original import: 5 Sept 2026; this is not its verification date. This is not a list of current offers or a popularity ranking.